FRTJ-PF Tenon Miter Jig for JMPv2 Precision Fence
Détails du produit
Precision Fence Tenon Miter Jig
HOW IMPORTANT IS WORK HOLDING?
It is the most important aspect for repeatable results. Because the saw is cutting from the bottom up, you are fighting negative feed-this is the tendency of the board to move upward resisting the cut. This upward tendency needs to be completely eliminated with proper work holding. It is particularly critical when the blade is tilted. If the stock move upward while the blade is tilted, you will almost always jam your stock on the blade, which is not good.
DESCRIPTION
The capabilities of the Precision Fence System really grow with the available accessories, the most important of which is the Tenon Miter Jig.The Tenon Miter Jig mounts to the Jointmaker Pro Precision Fence, allowing you to cut tenon cheeks and miters quickly and accurately. Since it mounts to the Precision Fence, you get the benefit of the fence's micro-adjustment feature to fine-tune your settings.
The main fence of the jig tilts 0° (horizontal) to 90° (vertical), meaning you can cut many miters, at any angle, without tilting the blade.
You can even cut compound bevels by tilting both the fence and the stock. The included friction-lock C-clamp holds stock up to 2" square firmly against the fence, ensuring accuracy.
MATERIAL QUALITY
It is made of anodized aluminum, so that it is of high strength, wear resistance and rust proof.
Service client
Contactez-nous pour toute question sur les produits et les commandes.
Garantie
- Les produits bénéficient d’une garantie d’un an à compter de la date d’achat.
- Elle couvre les défauts de fabrication dans des conditions normales d’utilisation. Les dommages liés à une mauvaise utilisation, un accident, l’usure normale ou une modification non autorisée sont exclus.
- Pour une demande de garantie, contactez-nous avec votre numéro de commande et des photos.
